SINGLE-PHASE NETWORK ANALYSER – V/I CONVERTER
Single-phase network analyser, voltage-current converter 1000 VDC/600 VAC and 0-10 A AC/DC. Measurements: Irms, Vrms, Watt, Var, Frequency, Cosφ, Energy, THD. Min and max values of all the RMS measurements.
USB configurable, DIN rail mounting, input with 4 kV galvanic isolation, universal power supply AC/DC, programmable alarm contact, RS485 Modbus and analogue output.
Data logging function which saves data to a USB pen drive, data are downloaded in .csv format (and can be imported directly into Excel) with date and time (built-in RTC Real Time Clock).
| VOLTAGE | Up to 1000 VDC / 600 VAC fully configurable via USB; |
| CURRENT | Up to 10 A AC/DC direct connection (more using external CT). |
| CURRENT | 0…20 mA programmable, maximum load 600 ohm; |
| VOLTAGE | 0…10 V programmable, minimum load resistance 2 kOhm. |
| RS485 MODBUS | bus connection on the bottom of the module or terminal, dip-switch for setting address and baudrate. |
| DRY CONTACT | Optomos contact, programmable NO/NC, programmable alarm contact on parameter chosen through the FACILE QA-POWER-M software |
MAIN FEATURES:
| POWER SUPPLY | 10…40 VDC, 20-28 VAC, 50-60 Hz |
| ABSORPTION | Maximum 2.5 VA |
| DEGREE OF PROTECTION | IP20 |
| ACCURACY | 0.5% FS |
| MEASUREMENTS | Irms, Vrms, Watt, Var, Va, Vpk, Ipk, Frequency, Cosφ, Bidirectional energy, THD |
| WORKING FREQUENCY | DC or 1…400 Hz |
| ISOLATION | 4 kV input, 1.5 kV between output, RS485 and power supply. |
| DIN RAIL MOUNTING | Ready for DIN rail mounting, removable terminals, RS485 connection and power supply on the bottom of the module through T-BUS connector (not included). |
| TERMINALS | Removable 5.08 mm |
| CE STANDARDS | EN61000-6-4/2006 + A1 2011 / EN64000-6-2/2005 / EN61010-1/2010 |
| DIMENSIONS | 17.5 x 100 x 112 mm (excluding terminals) |
| DATA LOGGER | Non-volatile memory. Log on USB On-The-Go port by pen drive. Built-in RTC Real Time Clock to manage date and time. |
| CONFIGURATION | using free FACILE QA-POWER-M software. |
