UNIVERSAL SIGNAL CONVERTER

UNIVERSAL signal converter, USB configurable, DIN rail mounting, 4-way galvanic isolation, universal power supply AC/DC, programmable alarm contact, RS485 Modbus.

DATA LOGGING function which saves data to a USB pen drive. They are downloaded in a format which can be imported into Excel (built-in RTC Real Time Clock).

Simultaneous analogue and digital input. Measures CURRENT, VOLTAGE, FREQUENCY, POTENTIOMETER, TEMPERATURE (RTD and TC).

INPUT  1 digital and 1 analogue at the same time
VOLTAGE  0…10 V, programmable, input impedance 100 kOhm, resolution 1 mV;
CURRENT  Up to 20 mA, programmable, input impedence 20 ohm, MAX resolution 2 μA;
TEMPERATURE  RTD Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 wire measurement, automatic detection of cable interruption, 400 or 4000 ohm. TC Type J, K, R, S, T, B, E, N; automatic detection of TC interruption, from -10 mV to +70 mV.
POTENTIOMETER  From 1000 ohm to 10 kOhm.
FREQUENCY  From 0.001 Hz to 9.99 KHz, mechanical contact, npn 2 and 3 wires, pnp 3 wires with 24 VDC power supply, namur, photoelectric, Hall sensor, variable reluctance, pulses 24 V, TTL.
OUTPUT  1 analogue, 1 digital, 1 RS485 at the same time
CURRENT  0…20 mA, programmable, maximum load resistance 600 ohm.
VOLTAGE  0…10 V, programmable, minimum load resistance 2 kOhm.
CONTACT ALARM  SPDT 5A 230 VAC relay, configurable using the FACILE QA-OMNI software.
RS485 MODBUS  RS485 serial bus connection on the bottom of module by adapter (optional) or on terminals. Front dip-switch for manual setting of address and baudrate.